Film packaging machine

Fully automatic flow wrapping machines for packaging products - regardless of their length - in a full wrap and without film overlap. The product is fed in via a conveyor belt and simultaneously wrapped in a half tubular film via a forming shoulder. A light barrier is used for product contact. The infeed belt can be easily adjusted to different product widths. After wrapping the product with film, the transverse seal is made with a permanently heated sealing system. The longitudinal seal is produced by a continuous side sealing device. The height of the forming shoulder and sealing devices can be adjusted manually. The remaining strip of film is collected on a film waste rewinder. These machines can be equipped with a hole punching device, a tear thread device and an ionizing device. Sütron BT20 operating terminal S5 Simatic control system Sealing punch with exchangeable sealing bar Side welding knife combination, can also be exchanged for a wheel knife system 5 perforating needle wheels Optical welding punch protection vertical Optical protection of the side weld Punch width 950mm Max. Film width 920mm specially coated, maintenance-free, completely odorless operation: Film tear and separation control: Film feed at the top and bottom for extremely light products Top and bottom film rollers for loading with motorized drive Sealing stamp protection for product protection and optimum work safety Compressed air-operated film blowing device for releasing the film from the the film from the lower sealing stamp Infinitely variable speed regulation of both conveyor belts, regulation range approx. 10 - 30 m/min Pneumatic hold-down device Height-adjustable